RobotGuide

Track 3 / 4

Embedded & controls

MCUs, motor drives, FOC, sensors, field buses. Spans hardware and software; the hardest people to replace.

28 topics · about 960 hours end to end, 23 of them to master level.

Stage 1 is either-or: Arduino (15 h) for the fastest visible result, ESP32 (25 h) if you want a networked co-processor — you do not need both. Stage 5 can be trimmed to E14 + E16 (55 h: enough to read waveforms and hold a conversation with hardware colleagues); hardware-leaning learners should take the full 135 h. Stage 8 adds the ROS 2 core mechanisms (D13) so controls people can also see why the upper layers stall. Add the D14 elective (45 h) only if you will do middleware replacement or real-time work.

Algorithm System software Embedded & controls Mechanical

Learning order

Walk the stages in order: each stage is the prerequisite of the next. Skipping ahead is paid back with interest around stage three.

Topic names link to their full topic page on the Chinese edition: what to learn, how to verify you have learned enough, the common mistakes, and an interactive figure you can drag.

The classic trap

Pure driver-development roles hit a visible salary ceiling. Move toward joint modules and control-system integration early; do not stop at writing peripheral drivers.

Jobs this track leads to

Pay figures are JD-stated ranges from Chinese recruiting platforms (CNY thousands per month × months per year). They describe the China market this curriculum is grounded in, not a promise anywhere.

Labs to build along the way

Interactive benches you can drag directly in the browser, on the Chinese edition.