RobotGuide
Labs/Rolling Holonomy Lab

Lab 14 / 15 · Interactive · real-time

Rolling Holonomy Lab

The ball rolls back to its start, the orientation doesn't — roll one loop and see how far it drifts, and what sets the drift.

Math: Circles and the Pythagorean theoremNo coding neededNo hardware needed≈ 6 min

Rolling parameters

Pathcircle path
Path radius ρ (or half side length)0.50
Ball radius R1.00
Rolling progress75%

What to look at

After one full loop (progress 100%), the compass needle does not return to its starting point — that offset is holonomy. At ρ/R=0.5 the closed-form prediction is 42.5°.

Rolling straight lines, however far, produces no holonomy — the fuel of holonomy is change in the path's direction. The twist a finger picks up rubbing one loop around an object's surface works the same way.

What problem this lab solves

In in-hand manipulation and regrasping, «the finger comes back around twisted» is not control error — it is the geometric phase (holonomy) of the pure-rolling constraint. The circular path has a closed form: net orientation = rotation about axis (−ρ/R, 0, −1) by 2π√(1+(ρ/R)²) (T14, Theorem 4.3). This bench lets you roll it yourself.

How to read the figure

Left is the top view: the path and the contact point's current position. Right is the orientation compass of the ball seen from above: the pointer is where the marked point on the sphere faces. Drag the progress bar through one full loop — when you return to the start, the pointer does not point home. That one offset tick is holonomy.

Hands-on

Circular path, ρ/R = 0.5: roll one loop, record the drift angle, and check it against the closed form 2π√1.25 mod 2π = 0.7416 rad ≈ 42.5°. Then shrink both path and ball by half (ρ and R halved together): the drift angle is identical — scale invariance. Finally switch to a square path, try L/R = 1 and 4, and note that the z-angle is not all of holonomy (the net orientation is a 3D rotation).

Related topics

Next labs (in play-learn order)