RobotGuide

Hands-on

The lab bench

The hardest things to explain in robotics are all of the form «turn one knob, watch another thing change». These fifteen experiments need no installation and no hardware — drag a slider and watch the physics appear.

Every lab ships with «how to read the figure» and «what to change» — watching without touching is a low-return activity.

Interactive · real-time

PID Tuning Lab

Drag three gains and watch one control curve go from sluggish to oscillating and back to stable.

8 min2 topics

A/B experiment

The Jitter Bill of a 1kHz Control Loop

The same control loop on stock Linux vs PREEMPT_RT — how many microseconds apart, made visible.

6 min2 topics

Animation · comparison

CAN vs EtherCAT: What Actually Differs

Two buses running side by side — one fights for every frame, the other arrives like a train on schedule.

5 min2 topics

Interactive · geometry

Two-Link IK and Singularities

Drag the target point: watch two solution sets, and what happens the instant the arm goes straight.

7 min2 topics

Interactive · comparison

What a Kalman Filter Actually Does

How a noisy sensor reading becomes an estimate that is smooth without lagging behind.

6 min3 topics

Calculator

Gear Ratio to End-Effector Force

Motor gives 3 N·m; through a 100:1 reduction, how much can the end effector actually push.

4 min2 topics

Timing · A/B

RTOS Scheduling and Priority Inversion

Three tasks fight over one CPU; flip on priority inheritance and see whether the high-priority task still gets stuck.

9 min2 topics

Signals · A/B

Differential Signaling and the Eye Diagram

Drag bit rate, cable length, and termination, and watch the eye go from open to shut.

9 min3 topics

Electronics · computable

PWM and Current Ripple

Change frequency, duty cycle, and inductance, and watch the ripple — higher frequency is not automatically better.

7 min3 topics

ROS 2 / middleware

QoS and Callback Backlog

Drag publish rate, callback time, and queue depth, and watch latency climb from 3 ms to hundreds of milliseconds.

8 min3 topics

Interactive · real-time

Hertz Contact Calibration Bench

Drag indentation depth and material: see why force goes as depth to the 1.5 power and stiffness grows as you press harder.

6 min2 topics

Interactive · real-time

Friction Cone Slicing Bench

Drag the direction angle and wedge count: see how much tangential capability gets sliced off when the cone becomes a polytope.

5 min2 topics

Interactive · real-time

Grasp ε Evaluation Bench

Move fingers, change friction, and watch grasp quality ε shift — and when it hits zero.

7 min2 topics

Interactive · real-time

Rolling Holonomy Lab

The ball rolls back to its start, the orientation doesn't — roll one loop and see how far it drifts, and what sets the drift.

6 min2 topics

Interactive · real-time

Slip Precursor Detection Bench

Tune the threshold and trade detection rate against false alarms — the precursor lives in the amplitude, not the derivative.

6 min2 topics

These are teaching models

The object models in the labs are simplified (first-order inertia, ideal buses, planar links). The magnitudes reference real systems, but they cannot replace measurement. Run the same experiment on a real machine and you will meet friction, backlash, and thermal drift the model does not have — that gap is exactly the sim-to-real problem.